Makita HR3541FC SDS Max AVT Rotary Hammer 850 Watt 110 Volt HR3541FC/1

The Makita HR3541C Rotary Hammer is fitted with Anti-Vibration Technology for increased user protection. Fitted with a soft start and is able to maintain constant speed under load, this machine is truly verstile.

The torque limiter stops the drill when the bit hits against reinforcements and it has a built in job light. It has three modes of operation: rotary only, hammer only and rotary hammer.

Supplied with a side handle, depth gauge, bit grease and a carry case.

Specification

Input Power: 850 Watt.
No Load Speed: 315-630/min.
Inpact Rate: 1,650-3,300/bpm.
Impact Energy : 6.1 Joules.
Drilling Capacity: Concrete: 35mm, Core Diameter (TCT): 90mm.
Weight: 5.6kg.

All vibration figures quoted are Tri-axial to EN60745 2006.

Vibration Drilling: 2.5 m/sec².
Vibration Chiselling: 12.5 m/sec².
Vibration Hammer Drilling: 18 m/sec².
Vibration K Factor: 1.5 m/sec².
Noise Sound Pressure: 93 dB(A).
Noise SoundPower: 104 dB(A).
Noise K Factor: 3 dB(A).