Makita DHR243Z SDS+ Rotary Hammer 24mm 18 Volt Bare Unit

260.94 Excl. VAT

SKU: MAKDHR243Z

Makita DHR243Z SDS Plus 3 Mode Hammer Drill 18V Bare Unit DHR243Z

Out of stock

The Makita DHR243 SDS Plus 3-Mode Hammer Drill has an efficient brushless DC motor and a quick-change drill chuck. The easy-to-grip handle has been ergonomically designed to give maximum power thrust and a sure, comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.
The tool body is separated into the upper and lower housings at the foot of the handle portion where the houses are jointed with vibration absorbing cushion rubbers.
Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures such as terminal breakage or poor electrical contact.
There are 3 modes of operation: rotation and hammering, hammering only and rotation only.

Specifications:

No Load Speed: 0-950/min.
Impact Rate: 0-4,700/bpm.
Impact Energy: 2.0 joules.
Capacity: Concrete 24mm, Steel 13mm, Wood 27mm.
Weight: 3.3kg.

All vibration figures quoted are Tri-axial to EN 60745 2006.

Vibration: Drilling: 3.5 m/sec?
Vibration K Factor: 1.5 m/sec?
Vibration: Hammer Drilling: 13.5 m/sec?

Vibration: Chiselling: 10.5 m/sec?

The Makita DHR243Z SDS Plus 3-Mode Hammer Drill is supplied as a Bare Unit – No Battery or Charger.

Weight 3 kg
Dimensions 370 × 120 × 255 mm
GTIN 88381654722
MPN DHR243Z
Trustpilot
To top